﻿
PZL-104 Wilga Modification for auto piloted glider-towing / PZL-104 Wilga Modifikation mit F-Schlepp-Autopilot

English:

This is a must-have modification of the Wilga towing airplane. 
It provides a autopilot which makes a second pilot unnecessary so you can focus on your glider.
After tightening the rope the autopilot will apply full throttle and lift off. 
Then, after gaining some altitude he'll fly continuous circles.

Please note:
Aerofly 5.7.1.9 or higher is requested.
The autopilot cannot be used in every scenery because he does not react to any kind of obstacles.
Make sure that the rope-lenth is set to 20m (default). 
The autopilot is able to take off properly up to about 5m/s cross wind.

If you want to, you can disconnect the autopilot via Aux-1 control-switch (make sure to set your control settings).


Installation:
Please extract the zip-folder and move the two files "wilga__autopilot.tmc" and "wilga__autopilot.tmd" to the default 
installation folder of the Ipacs Wilga (C:\...\Aerofly 5\aircraft\wilga\)


Deutsch:

Dies ist eine must-have Modifikation der Wilga für den Flugzeugschlepp.
Der Autopilot steuert die Schleppmaschine vollständig, sodass man auf einen zweiten Piloten vorm PC verzichten kann.
Nachdem das Seil gestrafft ist, wird der Autopilot langsam Vollgas geben und abheben.
Nach ein paar Metern Höhengewinn beginnt er dann kontinuierliche Linkskreise zu fliegen.

Bitte beachten:
Aerofly 5.7.1.9 oder höher ist erforderlich.
Der Autopilot kann nicht in jeder Szenerie eingesetzt werden, da er auf keinerlei Hindernisse reagiert.
Stellen Sie sicher, dass die Seillänge auf 20m (Standard) eingestellt ist.
Bis zu 5m/s Seitenwind kann der Autopilot in der Regel gut aussteuern. Bei mehr Wind hebt das Flugzeug zu früh ab.

Wenn Sie den Autopiloten abschalten möchten, können Sie das über Aux-1 tun (stellen Sie dazu ihre Kanaleinstellungen ein).

Installation:
Entpacken Sie den Zip-Ordner und verschieben die die zwei Dateien "wilga__autopilot.tmc" und "wilga__autopilot.tmd" in den Ordner des
Ipacs Modells im Installationsverzeichnis des Aerofly5 unter: C:\...\Aerofly 5\aircraft\wilga\


Have fun / Viel Spaß,
Jan